| SPECIFICATIONS |
SRC-18S |
| Grinding Wheel |
¡@ |
| Standard grinding range (Die.) |
Ø1¡ãØ80 mm |
| Capacity increases with special arrangement |
Ø40¡ãØ150 mm |
| Grinding wheel size (O.D. x width x I.D.) |
Ø455 x 205 x Ø228.6 |
| Grinding wheel speed |
1260 R.P.M. |
| Grinding wheel motor |
20 HP |
| Regulating Wheel |
¡@ |
| Regulating wheel size (O.D. x width x I.D.) |
Ø255 x 205 x Ø111.2 |
| Regulating wheel speed |
10¡ã300 R.P.M.(Variable) |
| Regulating wheel motor / S series |
2.2 KW servo motor |
| Regulating wheel tilt angle |
+5 ~-3 |
| Regulating wheel swivel angle |
 5 |
| Handwheel Graduation |
¡@ |
| Upper slide feed graduation |
3.5 mm/rev. 0.05 mm/graduation |
| Upper slide micro-feed graduation |
0.1 mm/rev. 0.001 mm/graduation |
Lower slide feed graduation
|
9 mm/rev. 0.05 mm/graduation |
| Lower slide micro-feed graduation |
0.2 mm/rev. 0.001 mm/graduation |
| Trimming device graduation |
2 mm/rev. 0.01 mm/graduation |
| Drive Motors |
¡@ |
| Hydraulic pump motor |
1 HP x 4P |
| Coolant pump motor |
1/4 HP x 2P |
| Machine Dimensions |
2200 x 1840 x 1530 mm |
| Net weight |
3200 kgs |
| Gross weight |
3500 kgs |
| Packing dimensions |
2280 x 1940 x 1850 mm |
